I went over some nautical terms associated with rigging and raising the mainsail. In this nautical beginner, we are going to discuss how to sail from day one, this being the first day. Hopefully, the wind is only at 5 or 6 knots, which makes it easy to maintain control of the sailboat, especially when this is your first time at the helm. Have a look at the following article taking us through the subject the first time to sailing chicago.
Did you know that chafe ranks as the sail-killer? According to sail makers, cruising and racing sails sustain lots of wear along batten pockets and where the mainsail touches the shrouds when running downwind. Ask your sail maker to beef up the mainsail with chafe patches. This can prolong the life of your sail for years to come.
Dry Your Headsail before you Stow It: Mold and mildew love to bed down in a moist fold of Dacron or Nylon. Cut these ugly outlaws down before they stain your costly sails. Dry your sails before you bag them when you get back to the dock. Hoist the headsail or mainsail on a light air day for a few minutes. This dries your sail fast and easy without the fuss of looking for a shore side method.
Fold Your Sails to Sustain Life: Stuff a sail in a bag underway makes perfect sense. But once you get in, pull it out and do it right. Use the flaking method. Start at the foot, reach up and pull down a fold. Continue this all the way to the head. On high-tech Mylar sails, roll the sail up like a sausage from foot to head. Folding or rolling helps keep the delicate coating on the sail surface intact.
But the first three years of this boat's life it had Polytarp sails. There is no big difference to me, performance wise, between the professionally made "real" sails it has now and the polytarp sails we originally used. The poly tarp worked just fine. Many people turn up their noses at poly tarp as a sail making material.
Running or reaching is the sailing term for traveling downwind and depending on the angle of the mainsail about the wind, determines if you are running or reaching. If running, the position of the mainsail is approximately 90 degrees to the center line of the hull. However, if you are reaching, then the mainsail is at an angle less than 90 degrees about the wind.
Depending on your natural abilities, you may be happy reaching first. By experimenting with angling the boom, you will gain the necessary skills for running or reaching. However, there a spacious assortment of shot approaches between a grin reach and consecutively downwind. The navigates are alleviated out away on or after the boat, but not as much as on a run or dead run.
To lubricate the mast, apply a coating of beeswax onto your slugs or slides and hoist the sail up and down the mast a few times. This will make hoisting or lower fast, easy, and worry-free. Use these super seafaring tips to save big dollars in sail repairs. You will be rewarded with better performance and longer sail life for many maritime seasons to come.
Did you know that chafe ranks as the sail-killer? According to sail makers, cruising and racing sails sustain lots of wear along batten pockets and where the mainsail touches the shrouds when running downwind. Ask your sail maker to beef up the mainsail with chafe patches. This can prolong the life of your sail for years to come.
Dry Your Headsail before you Stow It: Mold and mildew love to bed down in a moist fold of Dacron or Nylon. Cut these ugly outlaws down before they stain your costly sails. Dry your sails before you bag them when you get back to the dock. Hoist the headsail or mainsail on a light air day for a few minutes. This dries your sail fast and easy without the fuss of looking for a shore side method.
Fold Your Sails to Sustain Life: Stuff a sail in a bag underway makes perfect sense. But once you get in, pull it out and do it right. Use the flaking method. Start at the foot, reach up and pull down a fold. Continue this all the way to the head. On high-tech Mylar sails, roll the sail up like a sausage from foot to head. Folding or rolling helps keep the delicate coating on the sail surface intact.
But the first three years of this boat's life it had Polytarp sails. There is no big difference to me, performance wise, between the professionally made "real" sails it has now and the polytarp sails we originally used. The poly tarp worked just fine. Many people turn up their noses at poly tarp as a sail making material.
Running or reaching is the sailing term for traveling downwind and depending on the angle of the mainsail about the wind, determines if you are running or reaching. If running, the position of the mainsail is approximately 90 degrees to the center line of the hull. However, if you are reaching, then the mainsail is at an angle less than 90 degrees about the wind.
Depending on your natural abilities, you may be happy reaching first. By experimenting with angling the boom, you will gain the necessary skills for running or reaching. However, there a spacious assortment of shot approaches between a grin reach and consecutively downwind. The navigates are alleviated out away on or after the boat, but not as much as on a run or dead run.
To lubricate the mast, apply a coating of beeswax onto your slugs or slides and hoist the sail up and down the mast a few times. This will make hoisting or lower fast, easy, and worry-free. Use these super seafaring tips to save big dollars in sail repairs. You will be rewarded with better performance and longer sail life for many maritime seasons to come.
About the Author:
You can get a summary of the factors to consider when picking a sailing Chicago instructor and more information about an experienced instructor at http://www.saltydogchicago.com now.
Aucun commentaire:
Enregistrer un commentaire